Our candle glue is an easy-to-use pre-mixed gel, all you have to do is heat it, add color and smell and pour in! The gel will not shrink, so there is no need to refill! The burning time of the gel is twice that of wax, you can hang ornaments, wax blocks, marble, etc. You can add liquid dyes to color the gel and essential oils to create a fragrance.

One of the first choices you'll face if you want to make candles is which wax to use. At one time, the only choice was to stick a piece of wick into a lump of tallow or dip a reed into some grease to make a rushlight, but nowadays we have many different options.

2.0 COMPOSITION/INFORMATION ON INGREDIENTS

2.1White Oil
CAS No. 8042-47-5
2.2SEBS thermoplastic elastomer
CAS No. 66070-58-4
2.3Hazardous Ingredients None

3.0 HAZARDS IDENTIFICATIONS

3.1 Nature of Hazard
None of the ingredients of this product are classified as hazardous.

4.0 FIRST AID

4.1Eyes
Irrigate immediately with copious quantities of water for several minutes. Obtain medical attention if irritation persists.
4.2Skin
Hot contact - cool affected parts thoroughly under running water. Do NOT remove adhering material, obtain medical attention.
4.3Inhalation
Remove from exposure.
4.4Ingestion
Wash out mouth with water.

5.0 FIRE FIGHTING MEASURES

5.1Extinguishers
Foam, CO2, or powder DO NOT USE WATER.
5.2Special Exposure Hazards
Irritant fumes
5.3Special Protective Equipment
None

6.0 ACCIDENTAL RELEASE

6.1Spill control
Solid product: gather into containers
6.2Personal Precautions
No special requirements.
6.3Environmental Protection
Do not allow material to enter drains or water courses.

7.0 HANDLING AND STORAGE

7.1Handling
Do not eat, drink or smoke whilst using this product.
7.2Storage
No special precautions.

8.0 EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1Occupational Exposure Limits
EH 40
8.2Paraffin Wax Fumes
8Hr. TWA
2mg,m³ STEL 6mg.m³
8.3Engineering Control Measures
Local exhaust ventilation is recommended.
8.4Personal Protective Equipment
Wear impervious gloves (e.g. of PVC), in case of repeated or prolonged contact.

9.0 PHYSICAL AND CHEMICAL PROPERTIES

9.1Physical State
Clear gel at room temperature
9.2Colour
Water white
9.3Boiling Point/Range (°C)
Above 250
9.4Melting Point/Range (°C)
75-85
9.5Viscosity @ 99°C (cSt)
600-700
9.6Flash Point (closed, °C)
Above 200
9.7Relative Density (@20°C)
0.87g/cm³
9.8Solubility in water
Insoluble

10.0 STABILITY AND REACTIVITY

10.1Stability
Stable
10.2Conditions to avoid
Any source of ignition
10.3Materials to avoid
Strong oxidising agents
10.4Hazards Decomposition
Irritant fumes

11.0 TOXICOLOGICAL INFORMATION

11.1On Eyes
Irritating, but does not injure eye tissue.
11.2On Skin
Heated material may cause burns.
11.3By Inhalation
When heated emits fumes that irritate the respiratory system.
11.4By Ingestion
Low order of acute toxicity.
11.5Other
None known

12.0 ECOLOGICAL INFORMATION

12.1Environmental Assessment
When used and disposed of as intended, no adverse environmental effects are foreseen.
12.2Mobility
Insoluble in water.
12.3Persistence and Degradability
Not readily biodegradable, but is inherently biodegradable.
12.4Bioaccumulative Potential
Not known.
12.5Ecotoxicity
Not expected to be ecotoxic to fish/daphnia/algae