Test Item | Quality Index | The Measured Quality | Test Method |
Melting Point (℃) | 54~<56 | 54.4 | GB/T 2539 |
Oil Content % ≤ | 2.0 | 0.50 | GB/T 3554 |
Color Saybolt # ≥ | +18 | +30 | GB/T 3555 |
Light stability ≤ | 6 | 3 | SH/T 0404 |
Needle Penetration (25℃),1/10mm ≤ | 23 | 17 | GB/T 4985 |
Needle Penetration (35℃),1/10mm ≤ | EPORT | 68 | |
Kinematic Viscosity (100℃), mm²/s | REPORT | 3.447 | GB/T 265 |
0dor # ≤ | 2 | 1.5 | SH/T 0414 |
Water Soluble Acid And Alkali | null | null | SH/T 0407 |
Impurity and Water | null | null | Visual Inspection |
Conclusion | Qualified |
Ingredients | CAS | %Weight in product |
Paraffin waxes( Petrolem), Hydrotreated | 8002-74-2 | 100 |
Hazard identification: | none | |
Certical hazards to man and the environment | solid | none |
liquid | May cause burns | |
Short-term contact | solid | No hazards |
liquid | May cause burns | |
Eye contact | solid | No hazards |
liquid | The hot fluid may cause damage to the eyes | |
powder | May be irritating | |
Skin contact | solid | No hazards |
liquid | The hot fluid may cause burns | |
inhalation | solid | No hazards |
Liquid ) | Inhalation of paraffin wax vapours or powder-particles may cause respiratory tract irritation | |
Powder ) | ||
Ingestion | solid | No hazards, see point 11 toxicology |
liquid | Because of the temperature may cause burns on contact with mouth/oesophagus/stomach |
Immediate measures: | solid | none |
liquid | Same action as in case of burn | |
Eye contact | liquid | Flush eyes with cold water. Seek medical attention |
Skin contact | liquid | Immerse the area in water to assist cooling, apply sterile cover. Seek medical attention. |
inhalation | Not applicable | |
Ingestion | May cause damage only in liquid (hot) state. | |
Same action as in case of burns. | ||
Advice to physician | See above |
Suitable extinguishing media | CO2, foam, dry chemical powder, sand |
Extinguishing media which must not be used for safety reasons | Water |
Special exposure hazards arising from the substance, its combustion products, resulting gases | Incomplete combustion produces furnes, flue gases, carbon monoxide |
Special protective equipment | Breathing protection independent of the ambient air |
Additional information | Apply cold water in order to cool containers and environment exposed to danger. |
Personal precautions | solid | Not applicable |
liquid | Avoid contact with hot liquid | |
Environmental precautions | Solid ) | Keep away from drains and surface water |
Liquid ) | ||
Method of cleaning up | solid | Not applicable |
liquid | Contain the product, allow to cool and remove mechnically | |
Additional Instructions | solid | Not applicable |
liquid | Inform authorities in the case of leakage of large amounts |
Instructions for safe handling | solid | Usual handling of solid transport goods |
liquid | Usual precautions for handling fluids. Consider common hygiene measures for handling chemical substances | |
Instructions for prevention of fire and explosion | solid | None |
liquid | Prevent aerosol generation during pumping | |
powder | Danger (of explosion) adopt measures to prevent dust-explosion; (see point 9) |
Requirements for storage rooms and conditions | Slabs/ ) powder/ ) pastilles) | Store under cool, dry and light protected conditions |
Liquid | Storage tanks have to be installed and managed according to official regulations | |
Information on storage concerning incompatible substances | Liquid material is not allowed to contain water at temperatures above 100℃ (delay in boiling) | |
Additional information | See point 10=stability and reactivity |
Respiratory protection | solid | none |
liquid | Works in well ventilated rooms | |
Hand protection | solid | None |
liquid | Wear rubber or leather gloves | |
Eye protection | solid | None |
liquid | Wear safety goggles | |
Body protection | solid | None |
liquid | Wear protective clothing |
Physical state: | White waxy solid. Above the melting point, liquid. |
Color (Saybolt) Min | +30 ASTM D156 |
Odour | 1.5 |
Melting point: | 54-56℃ ASTM D87 |
Oil content Wt% | 0~0.5 ASTM D721 |
Needle Penetration 1/10mm (25℃) | 15 Max ASTM D1321 |
FDA | Passed 172.886 78.3710 |
Mechanical Impurity and Water | Negative Observation |
Acid and Alkali with Water solubility | Negative SH/T0407 |
Condition to avoid | liquid | High temperature, open flames, other sources |
Material to avoid | Solid/ ) | Avoid contact with strong oxidizing agents |
Liquid ) | ||
Hazardous decomposition | Carbon dioxide, carbon monoxide |
Summary | There is no evidence for toxic effects to experimental animal of paraffin wax |
Ingredient | Paraffin Wax (8002-74-2) |
Known | No |
Anticipated | No |
IARC Category | None |
AODING Group One- Stop Service for Candle-making.